Ep. 6 Planning 5.4 DOHC 32v Engine? “Project Redneck” Crown Vic Frame Swap / Install
I was going to keep the 4.6 2v engine, and decided to get a F-150 truck intake manifold for the PI engine to help drive torque better. It would also have a forward facing […]
Ep. 5 Removing Front Subframe & Talking Fitment. “Project Redneck” Crown Vic Frame Swap / Install
In this video of the crown vic frame install into a 1968 mercury montego station wagon. I finished cutting out the front subframe and was able to get a better test fit. Also finished cutting […]
Ep. 4 Bracing Install for floorpan Removal. “Project Redneck” Crown Vic Frame Swap / Install
In this video and pictures below of the crown vic frame install into a 1968 mercury montego station wagon… I will be mostly focused on the Installing of bracing for the subframe and floorpan removal. […]
Ep.3 Crown Vic Frame Swap with 68 Mercury Montego Station Wagon Frame Test Fit Project Redneck
Finally fully decided on project redneck for the wagon. Its had the redneck windshield banner for about 16 years, so it seemed fitting. Plus the goal is to use all parts from different vehicles, and […]
Project Redneck Ep.2 Crown Vic Frame Swap with 68 Mercury Montego Station Wagon Prep / Disassembly
In this second Crown Victoria frame swap video I will be showing the prep and disassembly of both the 01 Mercury Marquis, and the 68 Mercury Montego. This is basically the process I went through […]
Project Redneck Ep.1 Crown Vic Frame Swap with 68 Mercury Montego Station Wagon Introduction
Basically I’m taking a 1968 Mercury Montego MX Station Wagon Unibody that has been damaged / unsafe to really drive, and then Installing a 2001 Mercury Grand Marquis Ls Frame and powertrain in it. I […]
Subscribe to my YouTube channel
