In this video I was showing the 1969 Ford Torino station wagon I got for the crown vic frame swap of the 1968 Mercury Montego station wagon. I really needed the wagon as I needed […]
I was asked to help with some measurements of the 1968 2 door Ford Torino. The measurements should help with the 4 door to 2 door conversions. I made the picture below with all the […]
In this video I cut out all the parts of the unibody Mercury Montego wagon floorboard to get the crown vic frame swap to fit / tuck all the way in. I had to cut […]
I was installing new ring and pinion gears into an 8in rearend, for a 1968 Ford Torino GT, and decided to film the 3.80 gear swap process. Its basically the same procedure for a 9 […]
Just wanted to do a quick video of the car mockup I did to test different stances for the car. I think this helped a lot, because doing this has possibly changed my mine on […]
I was going to keep the 4.6 2v engine, and decided to get a F-150 truck intake manifold for the PI engine to help drive torque better. It would also have a forward facing […]
In this video of the crown vic frame install into a 1968 mercury montego station wagon. I finished cutting out the front subframe and was able to get a better test fit. Also finished cutting […]
In this video and pictures below of the crown vic frame install into a 1968 mercury montego station wagon… I will be mostly focused on the Installing of bracing for the subframe and floorpan removal. […]
Finally fully decided on project redneck for the wagon. Its had the redneck windshield banner for about 16 years, so it seemed fitting. Plus the goal is to use all parts from different vehicles, and […]
In this second Crown Victoria frame swap video I will be showing the prep and disassembly of both the 01 Mercury Marquis, and the 68 Mercury Montego. This is basically the process I went through […]
Basically I’m taking a 1968 Mercury Montego MX Station Wagon Unibody that has been damaged / unsafe to really drive, and then Installing a 2001 Mercury Grand Marquis Ls Frame and powertrain in it. I […]